Make sure Nasco Education is on your preferred vendor and bid lists! Send inquiries to: [email protected]
SKUTT EnviroVent 2 Ventilation System
Product Number: 9725622
No longer avaliable
This item has been discontinued
The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent them outdoors. The EnviroVent 2 also provides better heat uniformity and improves the firing atmosphere in the kiln while it is protecting you from the fumes. Your elements will last longer, your glazes will be clearer and brighter, and you will help prevent glazes migrating between pieces. The EnviroVent is wall mounted, moving the vent motor away from under the kiln so the motor is no longer exposed to the heat and can no longer transfer any vibration into the kiln. Since the vent is wall mounted, it pulls the air through the duct work instead of pushing it. This means if you were to ever form a leak in your duct work, the fumes would not be pushed into the room. The 120 V motor allows you to vent two kilns up to 12 cu. ft. each, or one kiln between 12 and 24 cu ft. An additional adapter kit is needed to vent two kilns. Heat exiting blower is 160° F maximum.