Nasco COLIWASA - Composite Liquid Waste Sampler

Tap to Zoom Close
Nasco COLIWASA - Composite Liquid Waste Sampler
Next Prev

Nasco COLIWASA - Composite Liquid Waste Sampler

Product Number: B01098

In Stock (Ships within 1-2 business days)

$52.30

Add to list

Nasco’s COLIWASA permits representative sampling of multiphase wastes for a wide range of viscosity, corrosivity, volatility, and solids content. The unit can be used to sample most containerized liquid wastes, except those containing ketones, nitrobenzene, dimethylformamide, mesityl oxide, and tetrahydrofuran. Its simple design is easy to use, and allows the rapid collection of samples, minimizing the exposure of the sample collector to potential hazards from the wastes. Manufactured of high-density polyethylene and designed to EPA standards, the COLIWASA consists of a 5 ft. x 3/4 in. (1.53 m x 1.9 cm) ID tube and closing valve. Sampler holds approximately 3 oz. per foot. (89 ml per .31 m). Not autoclavable.

To use:
1. Push down and hold the rod at the top to close the valve.
2. Lower the COLIWASA to the proper level and pull up on the rod approximately 2 in.- 3 in. (5-8 cm) to open the valve and collect the sample.
3. Push the rod down to close the valve and remove the sampler from liquid.
4. Pull up on the rod to empty the sample into an appropriate container. Or hold the valve slightly open while submersing the COLIWASA into the liquid to collect the sample from the surface down to the desired level. Push the valve closed, remove from the liquid, and empty into a container.

Brand  :       Nasco
Item Weight  :       2
 
small-new-guide-overlay-promo-banner-2.png

QUICK-TIP GUIDE

Your guide to an exceptional shopping experience.

Learn More

Stay informed

Be the first to hear about our new products and exclusive offers