Designing with STEM 24-Student Kit

Tap to Zoom Close
Designing with STEM 24-Student Kit
Next Prev

Designing with STEM 24-Student Kit

Product Number: KI03804

In Stock (Ships within 1-2 business days)

$5,295.00

 Type

Type Selection Quick Pick

Select Quantity

Add to list

[[ WARNING: Choking Hazard. • Small Parts. Not for children under 3 yrs. ]]
"Packed with a variety of tools to excite students and instructors alike! Introduce students to the fun and powerful tools of designing and problem solving. The activities and academic applications engage the learner to embrace science, math, engineering, and technology by examining the integral steps of critical design and problem solving. See below for names of units and included kit components. Grade 7.
Kit Components:

Defining the Problem Unit Components:
• 12-oz. can of fluorescent orange spray paint
• 2 single-scale polypropylene graduated cylinders (10 ml)
• 2 single-scale polypropylene graduated cylinders (25 ml)
• 2 single-scale polypropylene graduated cylinders (50 ml)
• 2 single-scale polypropylene graduated cylinders (100 ml)
• 2 pkgs. of plain 3 in. x 5 in. index cards (100 per pkg.)
• 3 pkgs. of fine sand (2.5 kg)
• 2 Bike pumps with gauge
• 4 pkgs. of smoothie straws (50 per pkg.)
• 6 uncoated foam balls (3 in.)
• Altitude finder
• Bottle launcher
• 12 flat flexible rulers
• 1 pk. of paper tubes (30 per pk.)
• 2 pkgs. of landform modeling clay (1-lb. pkgs. in 4 colors)
• 2 rolls of Scotch® transparent tape (1/2 in. x 36 yd.)
• 50-sheet pad of 8-1/2 in. x 11 in. graph paper
• 6 rolls of masking tape (3/4 in. x 60 yd.)
• 6 black Sharpie® fine-point industrial markers
• 6 rolls of Scotch® Magic tape (1/2 in. x 800 in.)
• 3 rolls of duct tape (1-7/8 in. x 45 yd.)
• 2 soft natural hair brush assortments (144 each)
• Pack of 144 acrylic paints (12 ml, 12 each of 12 colors)
• 6 pairs of 7 in. safety-point student scissors
• 6 low-temperature mini glue guns
• 6 pkgs. of 4 in. glue sticks (15 per pkg.)
• 6 bottles of gorilla glue (4 oz.)
• 6 boards of 26 in. x 38 in. chipboard
• PVC Coupling 1-1/4 in.
• 3 PVC reducers 1-1/4 in. x 1/2 in.
• PVC tee 1-1/4 in.
• 2 PVC pipes 1-1/4 in. x 2 ft.
• Tape teflon 1/2 in. x 60 in.
• Gauge pressure 2 in. 300 PSI
• PVC primer and solvent cement
• 2 Clamps 6 in.
• 2 HEX bushing brass 1/2 in. x 1/4 in.
• 2 Brass couplings 1/4 in.
• Hose barb 1/4 in. x 1/4 in.
• Barb brass w/ splicer 1/4 in.
• 3 Hose clamps 1/4 in. to 5/8 in.
• Galvanized nipple 1/2 in. to 4 in.
• Galvanized bushing pipe
• 2 90° galvanized elbows 1/4 in.
• 2 PVC Reducer Bushing 1 in. x 1/2 in.
• Valve Inline Flow 1 in.
• 3 Nipple pipes 1/4 in. x 2 in.
• 2 Nipple pipes 1/4 in. x close
• Pipe tee 1/4 in.
• Copper pipe 2 ft. x 1/4 (outside diameter)
• Air line tubing 20 ft.
• Battery, 6V
• Carlon® PVC enclosure (6 in. x 6 in. 4 in.)
• SPST toggle switch (20 amps)
• Toggle switch cover
• Video game switch with micro switch
• Crocodile clip with nickel-plated steel contact (5 amps)
• Disconnect RD F 22-16 AWG
• Standard ring terminal, nylon insulated, 22-18 AWG, #6 screw/stud size
• Rubber bumper, round, with washer (1-1/32 in. dia. x 5/8 in.H)
• Flat elect connector, 2-way, copper, 18 gauge
• Underground speaker cable (16 AWG) and in-wall speaker wire (16 ft.)
• Butt splice (16-14 AWG)
• Heat-shrink tubing (1 ft. L, 3/16 in. I.D.)
• Heat-shrink tubing (1 ft. L, 1/8 in. I.D.)
• Phillips screw #10-24 (5/8 in.)
• Zinc nut #10-24, grade 2

Determining and Defining Criteria Unit Components:
• 20 plastic syringes (3 cc)
• 20 plastic syringes (5 cc)
• 20 plastic syringes (10 cc)
• 20 plastic syringes (20 cc)
• 20 plastic syringes (30 cc)
• 20 plastic syringes (60 cc)
• 100-ft. of aquarium air line tubing
• 12 Y connectors
• 6 professional protractors (6 in.)
• 6 clearview rulers
• 6 No. 1 cutting knives with No. 11 blades and safety caps
• 3 pkgs. of all-temperature mini glue sticks (50 per pkg.)
• 6 high-temp, 10-watt mini glue guns
• 500 sheets of 8-1/2 in. x 11 in. white copy paper
• 12 4-hole panels
• 24 Carriage bolts 3/8 in. x 8 in.
• 48 Hex nuts 3/8 in.
• Nails 1-1/2 in. (1 lb.)
• Twine 350 ft.
• 36 Bolts, zinc plated 1/4 in. X 3-1/2 in.
• 36 Hex nuts zinc plated 1/4 in.
• 10 Corrugated white plastic sheets
• 6 8-Hole panels
• Scotch® duct tape 45 yd.
• 9 in. Styrofoam plates (pk. of 50)
• 6 7 in. Student scissors
• 6 10-ft. tubing (1/4 in. x 3/8 in.)
• 6 Nylon spacers (3/8 in. x 1 in.)
• 30 Female hose adapters (1/4 in.)
• 24 #19 O-rings
• 24 #70 O-rings
• 54 Male hose adapters (1/4 in.)
• 24 T Female nylon luers
• 24 Acorn 3/8-16

Testing and Evaluating Unit Components:
• 6 metal clamp lamps
• 300-ft. roll of twine
• 1-lb. box of baking soda
• Roll of paper towels
• Pkg. of 100 white craft fluffs
• 25-ft. roll of aluminum foil
• 6 plastic beakers (500 ml)
• 6 blindfolds
• Box of 2,000 white twist-ties
• 4-cup measuring cup
• Pkg. of 100 of white chenille stems (1/4 in. x 12 in.)
• 2 rolls of Scotch® transparent tape (1/2 in. x 36 yd.)
• 100 sheets of parchment card stock (8-1/2 in. x 11 in.)
• 6 pairs of 7 in. safety-point student scissors
• 6 photo planters
• 2 boxes of jumbo gem paper clips (100 per box)
• 4 Activity bins
• Hornwort coupon (per 30)
• 6 60 watt bulbs

Introduction to Problem Solving Unit Components:
• 10 Sandpaper - 220 grit
• 48 Neodymium disc magnets
• 1 Audio adaptable cable
• 1 Mini amplifier
• 24 Paper cup, 8 oz.
• 12 Heavy duty D batteries
• Series 2000 type plain enamel copper magnet wire, 26 gauge (4 spools, 1260 ft. each)
• 4 Rolls, black electric tape
• Craft glue dots, pk. of 600

Developing Ideas Unit Components:
• 6 boxes of Crayola® conical-tip markers (8 per box)
• 6 boxes of PRANG® crayons (8 per box)
• 50-sheet pad of 11 in. x 17 in. graph paper with 1/4 in. grid
• 6 boxes of Crayola® multicolored chalk (12 per box)
• 24 unsharpened No. 2 pencils with erasers
• 6 craft paper rolls (18 in. x 100 ft.)

Presenting the Solution Unit Components:
• 12 Electric guitars
• 12 Guitar neck, 34 in.
• 12 Screwdriver - Flat
• 12 Screwdriver - Phillip #1
• Instrument cable, 15 ft.
• Amplifier, 10 watt
• 4 Long nose pliers, 6-1/2 in.
• All-temperature glue sticks (1 pkg. of 100)
• 4 Fiskars® hand drill
• Chipboard, 9 in. x 12 in. (pk. of 40)
• 12 Low-Temp Mini Glue guns

Creating Solutions Unit Components:
• 2 bottles of 5%% solution vinegar (1 pint)
• 1-lb. box of baking soda
• 4 pkgs. of straws (200 per pkg.)
• 2 boxes of No. 1 paper clips (100 per box)
• 25 paper cups (12 oz.)
• 12 soft cloth beanbags (5 in. x 5 in.)
• Assortment of 100 corks
• 60 wheels (1-9/16 in.)
• 60 in. customary/metric tape measure
• 2 heavy-duty retractable blade mat knives
• 100 sheets of 8-1/2 in. x 11 in. card stock in bright colors
• 3 black Super Sharpie® markers
• 2 pkgs. of all-temperature mini glue sticks (50 per pkg.)
• 6 pairs of 7 in. safety-point student scissors
• 2 rolls of red duct tape (1-7/8 in. x 20-yd.)
• 2 high-temp, 10-watt mini glue guns
• 2 pkgs. of 9 in. balloons (25 per pkg.)
• 3 pkgs. of rubber bands (1/4-lb. assortments)
• 2 sheets of 12 in. x 36 in. x 1 in. Styrofoam
• 4 Lock washers w/intern, 1/4 in.
• PVC pipe, 3/4 in.-10 in.
• 18 in. Drawer slides (pk. of 2)
• Universal suction cups (pk. of 4)
• 3 Eye screws #6, 1-1/14 in.
• 1 Hose clamp, 1-3/4 in. x 2-3/4 in.
• 1 Bungee cord 12 in.
• 6 Flat head wood screws #6
• 4 Flat washers, 1/4 in. x 5/8 in.
• 1 MDF board, 18 in. x 24 in.
• 1 Dual-lock, 48 in.
• 1 bottle of gorilla wood glue (8 oz.)
• 4 90° PVC elbows
• 2 PVC schedule 40 pipes, 1-1/4 in. x 20 in.
• 2 PVC schedule 40 pipes, 1-1/4 in. x 14.5 in.
• 2 Board, 1 in. x 2 in. x 18 in.
• 1 Board, 1 in. x 2 in. x 12 in.
• Cotton clothesline, rope - 4 ft.
• Inflatable track
• 1/2 lb. Nails
• 1 Sheet medium sandpaper (9 in. x 10 in.)

Underwater ROV Challenge Supply Kit Components:
• 3 Polycon containers, 1 oz.
• 1 Disposable pipette, 7 ml
• 4 PVC T's, 1/2 in.
• Solder tube
• 1-12V battery
• 1-12V battery charger w/ cord
• 1 Toilet bowl wax ring
• 3-12V DC motors
• 6 Wire speakers, 18 AWG
• 15 Cable ties, 6 in.
• Urethane adhesive pouch 3.5
• 6 Screws, #6, 1/2 in.
• 6 Flat washers, #6
• 6 Brass hex nuts 4-40 (3/16 in.)
• Stretchable mesh, 12 in. x 8 in.
• 1/2 Roll category 5E cable, 350MH
• 2 Pool noodles, 5 in.
• Butyl rubber tape, 1-1/2 in. x 3 in.
• H-Column 3/8 in. ABS
• 3 Propeller/Shaft/Nut kits
• 6 PVC pipes, white - 1/2 in. x 12 in.
• 10 PVC elbows, white - 1/2 in.
• 1 Sea switch kit
• Cable tie 5 ft.
• 1 Alcohol prep pad
• Visitor's glasses
• Black and red alligator clips (1 of each color)
• Black electric tape, 3/4 in. x 60 ft.
• Flat flexible ruler - 1 in. x 12 in.
• Industrial black fine point marker
• Fine-point black marker

Underwater ROV Challenge Tool Kit Components:
• 3 Propeller/Shaft/Nut kits
• Sea switch kit
• 3 Alcohol prep pads
• 1 Sandpaper - 220 grit
• 1 Canvas tool bag, 15 in.
• 1 Drill w/cord, 3/8 in.
• 1 Soldering iron with stand
• 1 Ratcheting PVC cutter
• 1 7 in.Wire stripper/cutter
• 1 Alligator test lead, 36 in.
• 1 Desolder pump
• 1 Nut driver 1/4 in. x 3-1/4 in.
• 1 Drill bit, 3/32 in.
• 1 Drill bit, 1/4 in.
• 3 Nylon insert hex locknuts
• 3 Zinc plated T-nuts
• 1 Phillips screwdriver
• 2 PCB packs (board, fuse, holder)
• 1 Modular jack
• 1 Digital multimeters
• 1 Vise table 2-1/2 in.
• 1 Crazy Glue®
• 1 Mini wire cutter
• 1 Mini long nose plier"

Brand  :       Nasco
Item Weight  :       145
Prop 65  :      
 
small-new-guide-overlay-promo-banner-2.png

QUICK-TIP GUIDE

Your guide to an exceptional shopping experience.

Learn More

Stay informed

Be the first to hear about our new products and exclusive offers