To learn more about this program, professional development and instructional materials, visit STEM 101.

Defining the Problem Unit Components

Tap to Zoom Close
Next Prev

Product Number: KI03804(A)

No longer avaliable

This item has been discontinued


To be used with Designing with STEM 24-Student Kit (KI03804). Grade 7.

  • 12-oz. can of fluorescent orange spray paint
  • 2 single-scale polypropylene graduated cylinders (10 ml)
  • 2 single-scale polypropylene graduated cylinders (25 ml)
  • 2 single-scale polypropylene graduated cylinders (50 ml)
  • 2 single-scale polypropylene graduated cylinders (100 ml)
  • 2 pkgs. of plain 3 in. x 5 in. index cards (100 per pkg.)
  • 3 pkgs. of fine sand (2.5 kg)
  • 2 Bike pumps with gauge
  • 4 pkgs. of smoothie straws (50 per pkg.)
  • 6 uncoated foam balls (3 in.)
  • Altitude finder
  • Bottle launcher
  • 12 flat flexible rulers
  • 1 pk. of paper tubes (30 per pk.)
  • 2 pkgs. of landform modeling clay (1-lb. pkgs. in 4 colors)
  • 2 rolls of Scotch® transparent tape (1/2 in. x 36 yd.)
  • 50-sheet pad of 8-1/2 in. x 11 in. graph paper
  • 6 rolls of masking tape (3/4 in. x 60 yd.)
  • 6 black Sharpie® fine-point industrial markers
  • 6 rolls of Scotch® Magic™ tape (1/2 in. x 800 in.)
  • 3 rolls of duct tape (1-7/8 in. x 45 yd.)
  • 2 soft natural hair brush assortments (144 each)
  • Pack of 144 acrylic paints (12 ml, 12 each of 12 colors)
  • 6 pairs of 7 in. safety-point student scissors
  • 6 low-temperature mini glue guns
  • 6 pkgs. of 4 in. glue sticks (15 per pkg.)
  • 6 bottles of gorilla glue (4 oz.)
  • 6 boards of 26 in. x 38 in. chipboard
  • PVC Coupling 1-1/4 in.
  • 3 PVC reducers 1-1/4 in. x 1/2 in.
  • PVC tee 1-1/4 in.
  • 2 PVC pipes 1-1/4 in. x 2 ft.
  • Tape teflon 1/2 in. x 60 in.
  • Gauge pressure 2 in. 300 PSI
  • PVC primer and solvent cement
  • 2 Clamps 6 in.
  • 2 HEX bushing brass 1/2 in. x 1/4 in.
  • 2 Brass couplings 1/4 in.
  • Hose barb 1/4 in. x 1/4 in.
  • Barb brass w/ splicer 1/4 in.
  • 3 Hose clamps 1/4 in. to 5/8 in.
  • Galvanized nipple 1/2 in. to 4 in.
  • Galvanized bushing pipe
  • 2 90° galvanized elbows 1/4 in.
  • 2 PVC Reducer Bushing 1 in. x 1/2 in.
  • Valve Inline Flow 1 in.
  • 3 Nipple pipes 1/4 in. x 2 in.
  • 2 Nipple pipes 1/4 in. x close
  • Pipe tee 1/4 in.
  • Copper pipe 2 ft. x 1/4 (outside diameter)
  • Air line tubing 20 ft.
  • Battery, 6V
  • Carlon® PVC enclosure (6 in. x 6 in. 4 in.)
  • SPST toggle switch (20 amps)
  • Toggle switch cover
  • Video game switch with micro switch
  • Crocodile clip with nickel-plated steel contact (5 amps)
  • Disconnect RD F 22-16 AWG
  • Standard ring terminal, nylon insulated, 22-18 AWG, #6 screw/stud size
  • Rubber bumper, round, with washer (1-1/32 in. dia. x 5/8 in.H)
  • Flat elect connector, 2-way, copper, 18 gauge
  • Underground speaker cable (16 AWG) and in-wall speaker wire (16 ft.)
  • Butt splice (16-14 AWG)
  • Heat-shrink tubing (1 ft. L, 3/16 in. I.D.)
  • Heat-shrink tubing (1 ft. L, 1/8 in. I.D.)
  • Phillips screw #10-24 (5/8 in.)
  • Zinc nut #10-24, grade 2

Item Weight: 12
Age: 12 yrs.
Prop 65:
Assembly Required: false
Grade: 7
School Type: Middle School
Subject Areas: STEM
 

Reviews

Overall rating:
0 out of 5

Based on 0 review

0 of 0 Reviews

small-new-guide-overlay-promo-banner-2.png

QUICK-TIP GUIDE

Your guide to an exceptional shopping experience.

Learn More