Clamps

Double Symmetrical Burette Clamp

Symmetrical. Double, round plastisol-coated jaw. For two burettes or tubes. Length: 9-3/4". Jaw opening 3/8" to 1-5/8". More.

Burette Clamp, Lincoln Type

Stamped steel. The center to center distance between burettes is 7-1/4". Overall width is 9". Will hold burettes from 1/4" to 5/8" dia. More.

Tubing Clamp – Hoffman Screw for Tubing up to 5/8" in Diameter

A rugged clamp easily installed or removed without disconnecting the ends of tubing. Made from nickel-plated brass. More.

Tubing Clamp – Hoffman Screw for Tubing up to 7/8" in Diameter

A rugged clamp easily installed or removed without disconnecting the ends of tubing. Made from nickel-plated brass. More.

Clamp and Support Rod

Holds rods vertically or horizontally. Cast iron, black enamel finish. Furnished with 3/8" x 20" (10 mm x 508 mm) rod. More.

Pendulum Clamp

Clamps to any horizontal or vertical support rod up to 3/4" (16 mm) diameter. Designed to hold three pendulums spaced 2-1/8" (54 mm) apart with points for suspension of cords on the same ho... More.

Double Plated-Steel Burette Clamp

Strong, durable, plated steel construction. Jaws covered with plastic and rubber tubing. Will mount on rods up to 1/2" dia. Clamps fit up to 3/4" dia. rods. Overall length: 8". More.

Extension Clamp

Three-prong, aluminum extension clamp; prongs covered with rubber tubing. Overall length: 10". Jaws open to 4". Strong yet lightweight. More.

Burette Clamp

Symmetrical. Improved type. Plated jaws, aluminum muff. Clamp will fit rods up to 3/4" dia. More.

Plastisol-Coated Jaws Burette Clamp

Symmetrical. Round, plastisol-coated jaw with 3/8" to 1-3/8" opening. Length 6-3/8". Clamp will fit rods up to 3/4" diameter. More.