Galvanized, flexible steel tubing with a gas-proof rubber insulation covered with cotton braiding to meet the standards of the American Gas Association. The rubber connector ends easily attach to standard 3/8" nipples. Can be used with Tirrill b..

Galvanized, flexible steel tubing with a gas-proof rubber insulation covered with cotton braiding to meet the standards of the American Gas Association. The rubber connector ends easily attach to standard 3/8" nipples. Can be used with Tirrill b..

Noiseless burner allows separate control of both flame temperature and length. Clean flame from 1/2" to 12" high. Rustproof. One-piece, 3-1/2" octagon-shaped, nickel-plated, die-cast base with 7/16" tapered and serrat..

A noiseless burner designed to allow separate control of both flame temperature and flame length. Provides clean flame from 1/2" to 12" high. Completely rustproof. One-piece, 3-1/2" octagon-shaped, nickel-plated, die-cast..

For use with ¹⁄₂" tube burners equipped with flame stabilizer. (No extension required.) To be used with SB07242M Tirrill Burner. Optional beaker stand available (SB33225M).

For use with Hooded Spark Lighter (SB16654M).

This self-contained bunsen burner stands on its own as a benchtop burner, and can also be used as a handheld torch. Contains a completely controlled flame size that can be manually controlled for off/on or set for a continuous flame. Will not flare ..

Adjustable orifice for mixed or straight natural gas, 800 to 1200 BTUs. One-piece, chrome-plated venturi tube mounted on heavy, die-cast base. Diameter of grid 1-1/2", overall height 8-1/2".

Features flame stabilizer, air regulator, and orifice. Aluminum mixing tube, serrated gas inlet. Base is die-cast, nickel-plated zinc alloy. Mixing tube: 1/2" (13 mm) O.D. Gas inlet: 5/16" (8 mm) O.D. Overall height: 6-1/8" (156 mm

This strong, die-cast burner stand features a 4-1/2" dia. adjustable plate to hold a burner at any height to vary heat. Usable with any burner having a 3" base diameter. Stands 4-1/2" tall.