Vent-A-Kiln Systems

Vent-A-Kiln System – 27" dia. x 5" D Hood

Close-capture canopy hood system for removal of both excess heat and toxic fumes. Compact design fits easily on top of closed or vented kilns. Features two-speed exhaust system. Complete with outside venting kit and overhead counterweight pulley... More.

Vent-A-Kiln System – 32" dia. x 6" D Hood

Close-capture canopy hood system for removal of both excess heat and toxic fumes. Compact design fits easily on top of closed or vented kilns. Features two-speed exhaust system. Complete with outside venting kit and overhead counterweight pulley... More.

Vent-A-Kiln System – 37" dia. x 7-1/4" D Hood

Close-capture canopy hood system for removal of both excess heat and toxic fumes. Compact design fits easily on top of closed or vented kilns. Features two-speed exhaust system. Complete with outside venting kit and overhead counterweight pulley... More.

Swinging Bracket Assembly for 27", 32", and 37" Hoods

Hang unit from wall above kiln. Swing vent to either side to access top of kiln. Since swing bracket is wall-mounted, it can be used with suspended ceilings and even when ceilings are lower than 8 ft. or higher than 10 ft. More.

Vent-A-Kiln System – 44" dia. x 7-1/4" D Hood

Close-capture canopy hood system for removal of both excess heat and toxic fumes. Compact design fits easily on top of closed or vented kilns. Features two-speed exhaust system. Complete with outside venting kit and overhead counterweight pulley... More.

Vent-A-Kiln System – 54" dia. x 12" D Hood

Close-capture canopy hood system for removal of both excess heat and toxic fumes. Compact design fits easily on top of closed or vented kilns. Features two-speed exhaust system. Complete with outside venting kit and overhead counterweight pulley... More.

Swinging Bracket Assembly for 44" Hood

Hang unit from wall above kiln. Swing vent to either side to access top of kiln. Since swing bracket is wall-mounted, it can be used with suspended ceilings and even when ceilings are lower than 8 ft. or higher than 10 ft. More.

Swinging Bracket Assembly for 54" Hood

Hang unit from wall above kiln. Swing vent to either side to access top of kiln. Since swing bracket is wall-mounted, it can be used with suspended ceilings and even when ceilings are lower than 8 ft. or higher than 10 ft. More.

Negative Pressure Conversion System for 27", 32", and 37" Vent-A-Kilns

Motor mounted at the point of exit through wall, window, or roof pulling fumes and heat to the outside. Use this kit to convert the standard positive pressure system to a negative pressure system. Three-year warranty. Shipped directly from New York ... More.

Negative Pressure Conversion System for 44" and 54" Vent-A-Kilns

Motor mounted at the point of exit through wall, window, or roof pulling fumes and heat to the outside. Use this kit to convert the standard positive pressure system to a negative pressure system. Three-year warranty. Shipped directly from New York ... More.